Sponge stick printhead cleanroom sterile cleanwipe foam swab

Sponge stick printhead cleanroom sterile cleanwipe foam swab

Due to design reasons, the inkjet printer is easy to block the nozzle if it is not used for a long time. As long as inferior consumables are not used, just execute the nozzle cleaning program in the driver.

Inkjet printers turn ink into fine particles through nozzles and spray them onto printed paper. Some inkjet printers have three or four print nozzles to print yellow, magenta, cyan and black; Some of them share a common nozzle, which is divided into four colors.

Therefore, the printing effect will be reduced due to the blockage of the nozzle, for example, there are stripes, the printing is light, and the color is not correct.

The inkjet printers are divided into ink chamber type and ink cartridge type, as well as the modified continuous supply added by users without permission. Because the cost of the ink cartridge type is too high, it is easy to have problems in the modified trial continuous supply, so the manufacturer has introduced the ink chamber type, that is, the original continuous supply.

Take the most representative model: Epson L310 as an example to teach you how to clean the nozzle.

Step 1: Open the control panel

Step 2: Select the viewing device and printer

Step 3: Select the printer - right-click to print preferences

Step 4: Click Maintenance - Nozzle Inspection

Step 5: Observe the printed test page to determine whether the nozzle is blocked

If the nozzle is found to be blocked, click the Clean button. If the problem cannot be solved by conventional cleaning, please use a large amount of ink for cleaning. If repeated cleaning fails, please replace the nozzle and use original consumables.

How to effectively remove the dust and dirt from the printing head? Select a cleanroom swab, foam tipped swab, foam cleaning swabs, sterile cleanwipe foam swab to quickly and effectively clean the dust and dirt on the printing head.

MFS708 The Large Head and Long Handle polyurethane sponge wipe is made from 100 PPI polyurethane sponge and polypropylene rod thermoplastic processing. The double thermoplastic process allows the sponge to be firmly fused to the polypropylene rod, avoiding contamination from adhesives and eliminating the potential for the sponge to deflate during the wiping process. MFS708 is repeatedly cleaned in a clean room with deionised water and packaged in a double decontamination bag. We have Strict inspection standards and international quality assurance. Adhering to the heart of the craftsman to focus on the production of each batch of products, the goal of Miraclean is to make the quality control down to every production detail!

MFS-708 is thermally bonded by 100PPI open-cell polyurethane foam & light green PP handle, its large circular head possesses excellent solvent-holding capacity and durability. It is free from organic contaminants such as silicone, amide and phthalate esters, and it features very low non-volatile residue (NVR), ion content and particle generation. MFS-708 is specifically designed for general purpose cleaning of curve surfaces, and it also could be used as the disinfectant swab for medical application

Miraclean provide reliable products and custom design services to customers from all over the world, any requires about Cleanroom Swab, foam tipped swab, foam cleaning swabs, sterile cleanwipe foam swab please contact us.