Transportation:Ocean,Land,Air,Express,Others
Model No.: MFS-708
Place Of Origin: China
Total Length: 125mm
Head Length: 27mm
Head Width: 19.5mm
Head Thickness: 10mm
Handle Length: 120mm
Handle Width: 6.5mm
Handle Thickness: 2.7mm
Packaging: Packing Details: 100pcs/bag
Transportation: Ocean,Land,Air,Express,Others
What kinds of materials are there in the dust-free purification cleanroom swab head?
People often confuse this wiping stick with a Cleanroom Swab , but in fact, this dust-free wiping stick is essentially different from a cleanroom swab. The cleanroom swab head is made of cleanroom, which cannot be cleaned without dust, and may be damaged during the wiping process. Scrape off crumbs. The material of the wiper head is divided into two types: sponge head and cloth head, all of which have been cleaned and packaged in a clean room. Therefore, in a high-grade dust-free environment, the wiping consumables used must reach grade 100 or above. Only wiping cloths and wiping sticks can meet the requirements, while wiping paper and Cleanroom Swabs can only be used for product wiping in ordinary environments.
If the wiping stick is distinguished from the material of the head, we can make it more detailed and specific: the material of the head is not only the above two, currently on the market, there are 1. cloth head, 2. sponge head, 3. no Spinning head, 4.PVA head;
1. Cloth head: According to the difference of the cloth and its function and performance, the cloth head can be divided into the following types:
① Knitted nylon cloth (super wear-resistant)
② Knitted microfiber (wipe fine dust, average wear resistance)
③ Woven microfiber (professional for fiber wiping)
④ Knitted polyester (the cloth surface is longitudinally grained, the gap is deep, and it can accommodate more dirt)
The wiper sticks above the dust-free cloth head can be cleaned to a high level of 100, which is suitable for electronic use.
2. Sponge head: According to the density and chip removal of the sponge, there can be the following two
① Open-pored PU sponge, 100PPI (PPI--PORE PER INCH, refers to the number of holes per inch, the more the number, the finer the sponge, and the less likely to drop chips) The sponge density is lower, easy to drop chips, but absorbent Fast, suitable for medical use;
② Open-cell PU sponge, 400-500PPI, higher density than 100PPI sponge, less prone to chipping, high dust-free level, suitable for electronic use
3. Non-woven head
The grade is low, but the processing difficulty is relatively small and the price is cheap
4. PVA head:
Super absorbent capacity, high cleanliness, higher price
MFS-708 Large Circular Head Cleanroom Foam Swab Made With PP Plastic Polyurethane Foam
MFS-708 is thermally bonded by 100PPI open-cell polyurethane foam & light green PP handle, its large circular head possesses excellent solvent-holding capacity and durability. It is free from organic contaminants such as silicone, amide and phthalate esters, and it features very low non-volatile residue (NVR), ion content and particle generation. MFS-708 is specifically designed for general purpose cleaning of curve surfaces, and it also could be used as the disinfectant swab for medical application.
Product Features
① Free from silicone, amide and phthalate esters
② Low in particles, ion content and non-volatile residue
③ High solvent-holding capacity, compact and non-abrasive tip
④ Compatible with most common solvents such as IPA
⑤ Designed with large rectangular head & firm handle
Product Applications
① Cleaning with solvents such as IPA
② Cleaning large surfaces, printheads, equipments
③ Remove flux residues and excess materials
Specification of Other Hot Selling Cleanroom Swab
Model No. | Total Length | Tip Width | Tip Thickness | Tip Length | Handle Width | Handle Thickness | Handle Length |
MFS-707 | 129mm | 17mm | 9.5mm | 26mm | 6.5mm | 2.7mm | 103mm |
MFS-708 | 125mm | 19.5mm | 10mm | 27mm | 6.5mm | 2.7mm | 98mm |
MFS-712 | 124mm | 13mm | 7.5mm | 25mm | 5.7mm | 2.5mm | 99mm |
MFS-740 | 163mm | 6mm | 5.5mm | 17mm | 3mm | 3mm | 146mm |
MFS-742 | 68.5mm | 3.6mm | 3.5mm | 11.5mm | 2.8mm | 2.8mm | 57mm |
MFS-750 | 77mm | 3.2mm | 3.2mm | 11mm | 2.4mm | 2.4mm | 66mm |
MFS-751 | 65mm | 3.8mm | 3.8mm | 18mm | 2.5mm | 2.5mm | 47mm |
MFS-758 | 70mm | 3.2mm | 2.5mm | 10.5mm | 2.3mm | 2.3mm | 59.5mm |
Miraclean Technology Co, Ltd.
Established in 2003, Miraclean Technology is a manufacturer specializing in producing Cleanroom Products & Printers Cleaning Products. In order to meet or even exceed the industry standard, the plant is completely equipped with DI water system, sterilization equipment and purification workshops. Miraclean is committed to providing More Reliable Cleaning products for the contamination control industry. We are continuously striving for advancement to meet the demands of the growing market.
Miraclean provide reliable products and custom design services to customers from all over the world, any requires about cleanroom swab price,Polyurethane Swab price shenzhen,Printhead Swab price china,Polyester Wipes best price,Non-woven Wipes price,Cleanroom Wipes cost-effective please contact us.